Showing all 16 results
P-141M 17 commonly used geometric templates
Accept private customization
Length X width: 260X160mm
Thickness: 0.5mm
Feature: Soft and can be bent
Explanation:
There are a total of 17 geometric shapes, namely:
1. Cross, 2. Water droplet shape; 3. Parallel quadrilateral, 4. Hexagonal row, 5. Oval, 6. Playground shape
7. Arrow 1, 8. Arrow 2, 9. Heart shaped, 10. Arrow 3; 11. three
Angles, 12, hexagons, 13, pentagons, 14, diamonds; 15
Rectangle; 16. Square; 17. Circular;
P-21M Necklace template
Length X width: 250X160mm
Thickness: 0.5mm
Feature: Soft and can be bent
JEWELRY DESIGN TEMPLATE
T-47 SQUARES TEMPLATE
Length X width: 250X160mm
Thickness: 0.5mm
Feature: Soft and can be bent
Explanation: There are a total of 41 squares, with a minimum of 2 and a maximum of 45mm.
A new 2X23 rectangle has been added,
with a vertical coordinate axis and a permanent small circular hole with a center positioning of 8mm or more.
Pin-point centering holes make accurate locating or nesting possible.
T-520M Heart-shaped template
Accept private customization
Length X width: 250X160mm
Thickness: 0.5mm
Feature: Soft and can be bent
Explanation:
There are a total of 72 heart shapes, very rich! Minimum 3mm, maximum 40mm; heart
Same shape, length, and width; All hearts are divided into two groups, with the upper half being the universal heart
37 shapes; The lower part is 35 waist shaped hearts!
T-52M Drop or pear template
Length X width: 250X160mm
Thickness: 0.5mm
Feature: Soft and can be bent
Explanation:There are a total of 131 pear shapes, very rich! Min 2.5X1mm, Max
36X24mm; Group in units of length, with 4 widths in columns, such as length
There are 10X5, 10X5.5, 10X6.5, and 10X7.5 at a degree of 10mm
Four widths; Complete all the dimensions used in the design in one go!
T-777-1 JEWELRY DESIGNERS Diamond & Gemstone
Contains marquise, trillion, triangle, square emerald, heart, cushion square, cushion rectangle, tapered & straight baguette shapes.
Size 6-1/4″ X 9-7/8″(16cm X 25cm)
T-777-2 JEWELRY DESIGNERS Diamond & Gemstone
Contains round, square, oval, emerald and pear shapes.
Size 6-1/4″ X 9-7/8″(16cm X 25cm)
P-810M Protractor template
Accept private customization
Length X width: 250X160mm
Thickness: 0.5mm
Feature: Soft and can be bent
Explanation:
Circular diameter 10CM
And add the shape of a pentagram, making the fitting design more practical!
Need to quote based on order！
Thanks you order!
P-816M Large circular bracelet necklace template
Accept private customization
Length X width: 250X160mm
Thickness: 0.5mm
Feature: Soft and can be bent
Explanation:
Consisting of two parts
1. 815M (part of 15cm):
2. 816M (part of 16cm):
815M can be drawn: 38-42-48-52-58-62-68-72-78-82-88-92
-98-102-108-112-118-122-128-133-150mm large circle.
816M can be drawn:40-44-50-54-60-6470-74-80-84-90-94-100-104-110-
114-120-124-130-134-140-144-160mm large circle.
P-83M 6 commonly used geometric shapes
Accept private customization
Length X width: 250X165mm
Thickness: 0.5mm
Feature: Soft and can be bent
Explanation:
6 commonly used geometric shapes
Respectively: 1. Round 2-16mm;
2. Oval length 4-22mm;
3. The side length of an equilateral triangle is 5-22mm;
4. The diameter of the pentagonal circle is 3-30mm;
5. Square 3-25mm;
6. The distance between the two parallel lines of the hexagon is 3-22mm
Timel Jewelry Design Drafting Template
T-85M Circle template
BRANDS: TIMEL
SIZE : 207x120mm
P-87M Circular bracelet template
Accept private customization
Length X width: 260X161mm
Thickness: 0.5mm
Feature: Soft and can be bent
Explanation:
Designed for commonly used circular bracelet sizes. A total of 9 circles are included:
32, 35, 50, 52, 54, 56, 58, 60, 62mm
Each of the four corners can draw a quarter arc, corresponding to the following dimensions:
46, 48, 64, 66mm. All with center positioning holes!
Complements T-88M
P-88M Medium circular template
Accept private customization
Length X width: 260X163mm
Thickness: 0.5mm
Feature: Soft and can be bent
Explanation:
Designed for commonly used circular bracelet sizes. A total of 9 circles are included:
32, 35, 50, 52, 54, 56, 58, 60, 62mm
Each of the four corners can draw a quarter arc, corresponding to the following dimensions:
46, 48, 64, 66mm. All with center positioning holes!
T-89M METRIC SMALL INCREMENT CIRCLES
Size 6-3/8″ X 9-7/8″(16cm X 25cm)
70 precision circles from 1 to 30 mm.
Features one fourth mm. increments up to 13 mm. – then one half mm. increments to 24 mm. The template has permanent pin-point centering. Decimal inch equivalents are printed in small type near each circle.
T-97M METRIC ISOMETRIC ELLIPSE TEMPLATE
Size 6-1/4″ X 9-7/8″(16cm x 25cm)
Major axes 1 to 45mm.
44 ellipses 35° – 16′ projection.
Dimensions are for isometric axes. Inch equivalents are given in small type. Half of the 45mm ellipse is surrounded with pinholes spaced at every 15 isometric degrees.
Lifetime precision centering pinholes are provided for major, minor and isometric axes.
T-991M METRIC SMALL ELLIPSE TEMPLATE
Size: 6-1/4″ X 10″(16cm x 25cm)
Major axes 2 to 12mm..
12 projections 10° to 70°.
Decimal inch equivalents are shown in small type. Has permanent, accurate pin-point centering.